Return to Allison Transmission Homepage
Extranet Sales and Service Locator
Allison Transmission > Service > Fluid/Filter Change Intervals
Fluid and Filter Change Interval Calculator
You are not able to view the flash.


For the model you requested:

Transmission Allison Electric Drives™ EP 40/50 System™
Using 100% TranSynd™ or TES 295-approved fluid  Yes
Allison Transmission requires the following change intervals:
Transmission Fluid
100,000 miles
(160 000 km)

48 months,
whichever comes first.
Main Filter
50,000 miles
80 000 km
24 months
,
whichever comes first.
Internal Filter
Overhaul
Lube/Auxiliary Filter
If replacing a
Gold Series Filter
50,000 miles
80 000 km
24 months
,
whichever comes first.
If replacing a
High-Capacity Filter
100,000 miles
160 000 km
48 months
,
whichever comes first.
NOTES

NOTE: An initial 5,000-mile filter change interval is required for all New, ReTran®, and Overhauled transmissions. For more information, refer to the Initial Filter Change Interval Recommendation Chart.


Extended filter change intervals are only valid with the use of Allison Transmission high-capacity filters. For specific Allison Part Numbers, refer to Service Tip #1099.


Local conditions, severity of operation or duty cycle may require more or less frequent fluid change intervals that differ from the published recommended fluid change intervals of Allison Transmission.


Change fluid/filters after recommended mileage, months elapsed, or hours in operation, whichever occurs first.


Transmission protection and fluid change intervals can be optimized by the use of fluid analysis. Filters must be changed at or before recommended intervals.


Fluid exchange (purge) machines are not recommended or recognized due to variation and inconsistencies with ensuring removal of 100% of the used fluid.


TRANSYND, CASTROL, and the Castrol logo are registered trademarks of BP Lubricants Americas Inc., used under license.